V-cut depaneling machine

1. V-cut depaneling machine For internal strength generates during separation, Minimize it to value under 180uE ,to avoid solder crack or component damage
2. Able to depanel PCB edge of V-slot, minimum distance to component is 0.5mm,and max height of component is 60mm
3. Free sanding on Blade when it is worn.
4. PCB depaneling speed is one cut per second, controlled by pneumatic foot-plate switch
5. Blade activated negative, separation route and position in control safely
6. Pneumatically driven and electric control
7. PCB separation is not realized by friction, so no obvious metal residue left,
8. V-cut Depaneling life is over 6000000 times
9. Air pressure 6 to 8 kg, no requirement on working environment, simple maintenance by anti-rust oil
10. Guillotine type V-cut depaneling machine for Aluminum LED Board and FR4 Board
 
ASCEN as a PCB separator manufacturer provide the full SMT manufacturing equipment, producing different type PCB depaneling machine, include the blade moving type V-cut PCB separator, cutting disc type PCB cutting separator , Pneumatic cutting type PCB separator , Aluminum PCB separator , PCB punching separator , manual pcb separator, PCB depaneling router, Multi cutter PCB cutting machine are available as standard and customized products and can be equipped to fit special requirements 

Subject	Parameters
Model No (PCB cutting machine)	ASC-620
Max Cutting Length	330mm
Cutting Thickness	0.5 to 3.5 mm
Working Pressure	0.6 to 0.8 Mpa , dry air source
Max Height of Component	50mm
Equipment Dimension	700*550*460mm
Working Voltage	AC 220V 50~60HZ
Gross weight	120KG